--********************************************************************
--
-- CISCO-BCP-MIB.my: MIB file for Bridge Control Protocol (RFC 2878)
--
-- June 2002, Hui Fu
--
-- Copyright (c) 2002, 2004 by cisco Systems, Inc.
-- All rights reserved.
--
--********************************************************************CISCO-BCP-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPE,Unsigned32FROM SNMPv2-SMI
ifIndex
FROM IF-MIB
DisplayStringFROM SNMPv2-TC
ciscoMgmt
FROM CISCO-SMI
MODULE-COMPLIANCE,OBJECT-GROUPFROM SNMPv2-CONF;ciscoBcpMIB MODULE-IDENTITYLAST-UPDATED"200408310000Z"ORGANIZATION"Cisco Systems, Inc."CONTACT-INFO" Cisco Systems
Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134-1706
USA
Tel: +1 800 553-NETS
E-mail: osm-wan-snmp@cisco.com"DESCRIPTION"This MIB module describes the Managed Objects for
of Bridge Control Protocol (RFC2878). This MIB is
influenced by RFC1474. "REVISION"200408310000Z"DESCRIPTION"Import Unsigned32 from SNMPv2-SMI."REVISION"200208020000Z"DESCRIPTION"Initial Version of this MIB module."::={ ciscoMgmt 275}ciscoBcpMIBObjects OBJECTIDENTIFIER::={ ciscoBcpMIB 1}-- The BCP Group.bcpOperTable OBJECT-TYPESYNTAXSEQUENCEOF BcpOperEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Table containing the status of the local BCP entity
that is related to the operation of Bridging Control
Protocol."::={ ciscoBcpMIBObjects 1}bcpOperEntry OBJECT-TYPESYNTAX BcpOperEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Operational status information for a particular BCP
link. For all entries in ifTable with ifType ppp(23),
there will be an entry in this table."INDEX{ ifIndex }::={ bcpOperTable 1}
BcpOperEntry ::=SEQUENCE{
bcpOperStatus
INTEGER}bcpOperStatus OBJECT-TYPESYNTAXINTEGER{open(1),closed(2),listening(3)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The operational status of the Bridge Control
Protocol. The possible values are :
open(1) - the BCP link is up and both ends
are configured in the compatible manner.
closed(2) - the BCP link is down and neither
ends are configured.
listening(3) - the local BCP entity is configured
and the remote end is not configured compatibly."::={ bcpOperEntry 1}--
-- The BCP Configuration table
--bcpConfigTable OBJECT-TYPESYNTAXSEQUENCEOF BcpConfigEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Table containing the configuration information
for the local BCP entity that is related to
the operation of Bridging over the PPP link."::={ ciscoBcpMIBObjects 2}bcpConfigEntry OBJECT-TYPESYNTAX BcpConfigEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Bridging Configuration information for a
particular BCP link. For all entries in
ifTable with ifType ppp(23), there will be an
entry in this table."INDEX{ ifIndex }::={ bcpConfigTable 1}
BcpConfigEntry ::=SEQUENCE{
bcpConfigBridgeIdControl
INTEGER,
bcpConfigBridgeId
Unsigned32,
bcpConfigLineIdControl
INTEGER,
bcpConfigLineId
Unsigned32,
bcpConfigMacSupport
INTEGER,
bcpConfigMacType
INTEGER,
bcpConfigTinygram
INTEGER,
bcpConfigMacAddressControl
INTEGER,
bcpConfigMacAddress
DisplayString,
bcpConfigSpanTreeControl
INTEGER,
bcpConfigSpanTree
INTEGER,
bcpConfigIeee802dot1qTagged
INTEGER,
bcpConfigMgmtInline
INTEGER,
bcpConfigBCPacketIndicator
INTEGER}bcpConfigBridgeIdControl OBJECT-TYPESYNTAXINTEGER{ enabled(1), disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The Bridge-Identification configuration option
is designed for use when the line is an
interface between half bridges connecting
virtual or physical LAN segments.
When enabled the local BCP entity initiates a
Bridge Identification Option negotiation. "REFERENCE"Section 5.1, Bridge-Identification, of RFC2878"::={ bcpConfigEntry 1}bcpConfigBridgeId OBJECT-TYPESYNTAXUnsigned32(0..15)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The bridge number of the local BCP entity.
This value is meaningful only when the local
BCP entity has negotiated the BridgeId
Configuration option, which means the value
of bcpConfigBridgeIdControl is enabled(1).
The two half bridges must agree on the bridge
number."REFERENCE"Section 5.1, Bridge-Identification, of RFC2878"::={ bcpConfigEntry 2}bcpConfigLineIdControl OBJECT-TYPESYNTAXINTEGER{ enabled(1), disabled(2)}
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The Line-Identification configuration option
is designed for use when the line is assigned
a LAN segment number.
When enabled the local BCP entity initiates
a Line Identification Option negotiation."REFERENCE"Section 5.2 , Line Identification, of RFC2878"::={ bcpConfigEntry 3}bcpConfigLineId OBJECT-TYPESYNTAXUnsigned32(0..4095)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The LAN segment number of the local BCP entity.
This value is meaningful only when the local
BCP entity negotiated the LineId Configuration
option, which means the value of
bcpConfigLineIdControl is enabled(1).
The two half bridges must agree on the LAN
segment number."REFERENCE
"Section 5.2, Line-Identification, of RFC2878"::={ bcpConfigEntry 4}bcpConfigMacSupport OBJECT-TYPESYNTAXINTEGER{ enabled(1), disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The Mac-Support configuration option is
provided to permit implementations to
indicate the sort of traffic they are
prepared to receive.
When enabled the local BCP entity initiates
a Mac-Support Option negotiation. "REFERENCE"Section 5.3 , MAC-Support, of RFC2878"::={ bcpConfigEntry 5}bcpConfigMacType OBJECT-TYPESYNTAXINTEGER{ieee802dot3Canonical(1),ieee802dot4Canonical(2),ieee802dot5NonCanonical(3),
fddiNonCanonical(4),ieee802dot5Canonical(11),fddiCanonical(12)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The MAC type that this local BCP entity is
prepared to receive and service.
This value is meaningful only when the local
BCP entity has negotiated the MAC-Support
Configuration option, which means the value
of bcpConfigMacSupport is enabled(1).
These values definition are specified in the
most recent RFC1700. "REFERENCE"Section 5.3, Mac-Support, of RFC2878"::={ bcpConfigEntry 6}bcpConfigTinygram OBJECT-TYPESYNTAXINTEGER{ enabled(1), disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The Tinygram-Compression configuration option
permits implementations to indicate support
for Tinygram Compression.
When enabled the local BCP Entity initiates
a Tinygram-Compression Option negotiation. "REFERENCE"Section 5.4 , Tinygram-Compression, of RFC2878"::={ bcpConfigEntry 7}bcpConfigMacAddressControl OBJECT-TYPESYNTAXINTEGER{ enabled(1), disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The Mac-Address configuration option enables
the implementations to announce its MAC address
or have one assigned.
When enabled the local BCP Entity initiates
a Mac-Address Option negotiation. "REFERENCE"Section 5.5 , Mac-Address , of RFC2878"::={ bcpConfigEntry 8}bcpConfigMacAddress OBJECT-TYPESYNTAXDisplayString(SIZE(1..20))
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value is meaningful only when the local
BCP entity has negotiated the MAC-Address
configuration option, which means the value
of bcpConfigMacAddressControl is enabled(1).
If it is non-zero format, the local BCP get
its MAC address announced. It is represented
in IEEE 802.1 Canonical format.
If it is in zero format, i.e. 00-00-00-00-00-00
then the implementation of the system wishes to
have a MAC address assigned."REFERENCE"Section 5.5, MAC-Address, of RFC2878"::={ bcpConfigEntry 9}bcpConfigSpanTreeControl OBJECT-TYPESYNTAXINTEGER{ enabled(1), disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The Spanning-Tree-Protocol configuration option
enables a bridge to remain compatible with
older implementations of BCP.
When enabled the local BCP Entity initiates
a Spanning-Tree-Protocol Option negotiation. "REFERENCE"Section 5.6, Spanning-Tree-Protocol, of RFC2878"::={ bcpConfigEntry 10}bcpConfigSpanTree OBJECT-TYPESYNTAXINTEGER{null(0),ieee802dot1D(1),ieee802dot1GExtended(2),ibmSourceRoute(3),decLanBridge100(4)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The desired spanning tree protocol of the local
BCP entity. The listing values of the Spanning-
Tree Protocol are specified in the most recent
RFC1700.
This value is meaningful only when the local BCP
entity has negotiated the Spanning-Tree-Protocol
configuration option, which means the value of
bcpConfigSpanTreeControl is enabled(1). "REFERENCE"Section 5.6, Spanning-Tree-Protocol, of RFC 2878"::={ bcpConfigEntry 11}bcpConfigIeee802dot1qTagged OBJECT-TYPESYNTAXINTEGER{ enabled(1), disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The IEEE-802-Tagged-Frame configuration option
permits the implementation to support for IEEE
802.1q Tagged Frame.
When enabled the local BCP Entity initiates
a IEEE-802-Tagged-Frame Option negotiation. "REFERENCE"Section 5.7, IEEE-802-Tagged-Frame, of RFC2878"::={ bcpConfigEntry 12}bcpConfigMgmtInline OBJECT-TYPESYNTAXINTEGER{ enabled(1), disabled(2)}
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The Management-Inline configuration option
indicates that the system is willing to receive
any IEEE-defined inter-bridge protocols.
When enabled if the local BCP Entity initiates
a Management-Inline Option negotiation. "REFERENCE"Section 5.8 , Management-Inline, of RFC2878"::={ bcpConfigEntry 13}bcpConfigBCPacketIndicator OBJECT-TYPESYNTAXINTEGER{ enabled(1), disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The Bridge Control Packet Indicator
configuration option permits the implementation
to indicate support for Bridge Control Packet
Indicator.
When enabled the local BCP Entity initiates
a Bridge Control Packet Indicator Option
negotiation. "REFERENCE"Section 5.9 , Bridge-Control-Packet-Indicator,
of RFC2878"::={ bcpConfigEntry 14}-- Conformance InformationcBcpMIBConformance OBJECTIDENTIFIER::={ ciscoBcpMIB 3}cBcpMIBCompliances OBJECTIDENTIFIER::={ cBcpMIBConformance 1}cBcpMIBGroups OBJECTIDENTIFIER::={ cBcpMIBConformance 2}-- Compliance StatementcBcpMIBCompliance MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement for entities which implement
this Cisco BCP MIB."MODULE-- this moduleMANDATORY-GROUPS{ cBcpMIBGroup }::={ cBcpMIBCompliances 1}-- Units of ConformancecBcpMIBGroup OBJECT-GROUPOBJECTS{
bcpOperStatus,
bcpConfigBridgeIdControl,
bcpConfigBridgeId,
bcpConfigLineIdControl,
bcpConfigLineId,
bcpConfigMacSupport,
bcpConfigMacType,
bcpConfigTinygram,
bcpConfigMacAddressControl,
bcpConfigMacAddress,
bcpConfigSpanTreeControl,
bcpConfigSpanTree,
bcpConfigIeee802dot1qTagged,
bcpConfigMgmtInline,
bcpConfigBCPacketIndicator
}STATUScurrentDESCRIPTION"A collection of objects providing the configuration
and operating status of the BCP entity."::={ cBcpMIBGroups 1}END